|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Appleby Circular Dry Liner Box 47mm
|
|
1 Gang 35mm Circular Dry Lining Box 2 Adjustable LugsLarge flange to prevent slipping into cavityAllows 6.35mm to 15mm plaster board depth1 x 25mm base knockoutBS5733, 80mm diameter * 2 Adjustable Lugs * Large flange to prevent slipping into cavity * Allows 6.35mm to 15mm plaster board depth * 1 x 25mm base knockout * BS5733, 80mm diameter
|
|
|
|
|
|
FloPlast Reducer 40mm x 32mm
|
|
Connects 40mm waste systems to 32mm waste systems. Made from polypropylene, this is a quick and easy way to install waste systems incorporating a push-fit ring seal system. An allowance of a 10mm expansion gap on all push-fit joints is required for the expansion of pipes and fittings in each socket of push-fit systems. Requires no solvent welding or tightening. Manufactured to BS EN 1451-1: 2000 / BS 5254.
|
|
|
|
|
|
Masonry Drill 5 x 85mm
|
|
Good quality Rotary Impact Drills. Tungsten Carbide tip with Brass / Zinc Alloy braze. Hardened shanks. Walleted.
|
|
|
|
|
|
Socket Plug 32mm
|
|
Designed to plug any unused sockets. Made from polypropylene, this is a quick and easy way to install waste systems incorporating a push-fit ring seal system. An allowance of a 10mm expansion gap on all push-fit joints is required for the expansion of pipes and fittings in each socket of push-fit systems. Requires no solvent welding or tightening. Manufactured to BS EN 1451-1: 2000 / BS 5254.
|
|
|
|
|
|
Socket Plug 40mm
|
|
Designed to plug any unused sockets. Made from polypropylene, this is a quick and easy way to install waste systems incorporating a push-fit ring seal system. An allowance of a 10mm expansion gap on all push-fit joints is required for the expansion of pipes and fittings in each socket of push-fit systems. Requires no solvent welding or tightening. Manufactured to BS EN 1451-1: 2000 / BS 5254.
|
|
|
|
|
|
Straight Coupling 32mm
|
|
Made from polypropylene, this is a quick and easy way to install waste systems incorporating a push-fit ring seal system. An allowance of a 10mm expansion gap on all push-fit joints is required for the expansion of pipes and fittings in each socket of push-fit systems. Requires no solvent welding or tightening. Manufactured to BS EN 1451-1: 2000 / BS 5254.
|
|
|
|
|
|
Straight Coupling 40mm
|
|
Made from polypropylene, this is a quick and easy way to install waste systems incorporating a push-fit ring seal system. An allowance of a 10mm expansion gap on all push-fit joints is required for the expansion of pipes and fittings in each socket of push-fit systems. Requires no solvent welding or tightening. Manufactured to BS EN 1451-1: 2000 / BS 5254.
|
|
|
|
|
